Blog

Recently we've received  the following information from Kohler about releasing new firmware for RDC2 blue controller:

"NEW FIRMWARE RELEASE (12/16/2019 VERSION 1.4.4)
RDC2 BLUE BOARD CONTROLLERS ONLY!

More...

Northwest Electric System demonstrates below the difference bewteen Article 700 - Emergency Generator, Article 701 - Standby Generator, and Article 702 - Optional Generator.  The information above was derived from the National Electrical Code, NFPA 70 and online website eaton.com.
https://www.eaton.com/ecm/groups/public/@pub/@electrical/documents/content/td00405018e.pdf

More...

Generator Installation in Wilmette

Village of Wilmette requires everyone who intends to install a generator to submit a permit application as well as 2 copies of the plate of survey and 2 copies of manufacturer’s specification of the transfer switch and the unit’s set and noise output. In addition, the inspector will need to come to assess the construction final and electrical final. What is more, there are certain restrictions on installing and utilizing the generator. Village of Wilmette mentions the following restrictions on their websites :

More...

Generac Generator Load Test

TWO HOURS GENERATOR LOAD BANK TESTING

Generator has been tested for two hours by two Simplex resistors. Test was done by NFPA 110 - Standard for Emergency and Standby Power Systems.

More...

To make sure that your generator is able to support the load and run effectively when needed, we offer load bank tests that if conducted professionally can pinpoint generator’s defects and save your business a lot of money.

More...

300 Kw Generator

Many generators’ owners wonder why they should have their equipment tested by the load bank. NES recommends load bank test to prevent a common condition in diesel engines called wet stacking.

More...

Generator service performed in Mt Prospect. Initially the generator did not work. After Northwest Electric System performed the generator maintenance the standby Generac generator was ready to run.

More...

Chicago Generac Generator Load Bank Testing

Northwest Electric System performed generator load bank testing according to

NFPA 110 - Standard for Emergency and Standby Power Systems and Chicago Electrical Code 18-27-701.17

More...

Preparing your generator for fall and winter.

A lot of people underestimate the significance  of regular generator service.
They think that skipping a generator maintenance is acceptable especially if there have been no power outages in last months.

More...

Why it is important to have a reliable and professional company to install your whole house generator system?

                It happens sometimes that customers decide to purchase the standby generators themselves and have a friend with little electrical background to install it.

More...

Why summer is the best time to consider installing a home standby generator?

Having a generator that automatically starts up to provide electricity to your house when there is no power is apparently beneficial. Summer is definitely the right time to have the generator installed for several reasons.

More...

Generator For Extreme Cold Weather in Chicago

......... at winter time when it is freezing outside everyone appreciates a warm cup of tea of coffee at a warm house.........

More...

Northwest Electric System, Inc performed load bank for Industrial Power Generac generator. Before the unit was tested, it needed to be repaired because the DC engine alternator was broken.

More...

Full Load Bank Testing Baldor TS80

Load bank test was done on mobile 80 KVA Baldor generator.

More...

Northwest Electric System, Inc peforms generator servicing for industrial 350 kW Generac generator.  This natural gas generator was supplied by 2 inch flexible gas pipe under the pressure between 11-15 in of W.C.

More...

Northwest Electric System, Inc peforms  the following while working on natural gas generator :

More...

Northwest Electric System, Inc recommends Kohler standby generator for commercial and residential customers.

More...

Quick Contact

WHO WE ARE

Northwest Electric System, Inc. is a progressive, loyal, and reliable business. Our many years of experience have made us experts when handling an assortment of electrical projects. We are always careful and precise because working with electricity requires attention to detail and great care to ensure that all electrical projects are completed in a prompt, efficient, and safe manner.
OUR GOAL at Northwest Electric System, Inc. is to provide an excellent, efficient, and high-quality service which is always tailored specifically to the needs of our clients.
OUR MISSION is to create long term relationships with our customers and to maintain the highest level of professionalism, honesty, integrity, and reliability.

WHAT WE DO

Northwest Electric System Inc. is an expert in the installation, service, and repair of backup generators. We specialize in liquid and air cooled standby generators. We also offer load bank testing to ensure that the generator is functioning at its full capacity.
We promote many brands of generators including Kohler, Generac, Briggs & Stratton, GE, Cummins Onan, Winco.
We have been providing our services to customers in Chicagoland for many years. We are a valuable resource to both residential and commercial entities that desire a professional and  prompt electrical company.

Services

Generators Load Bank Testing

Generators Load Bank Testing

Generators Installation

Generators Installation

Generators Service

Generators Service

Generators Repairs

Generators Repairs

Our Products

Winco Generator

Winco Generator

Milbank Generator

Milbank Generator

Kohler Generator

Kohler Generator

Generac Generator

Generac Generator

Cummins Onan Generator

Cummins Onan Generator

Briggs Stratton Generator

Briggs Stratton Generator